Skip to main content
FL

Well Drilling in Florida

Avg. $6,000 - $25,000 · One-time (well lifespan 30-50 years) · 427 providers

22
Cities
427
Providers
$6,000 - $25,000
Avg. Cost

Water well drilling is the process of boring a hole into the earth to access underground aquifers that provide fresh water for drinking, irrigation, and household use. Approximately 43 million Americans rely on private wells as their primary water source. Residential wells typically range from 100 to 500 feet deep depending on the local geology and water table depth, though some areas require wells exceeding 1,000 feet. The drilling method depends on the geological conditions — rotary drilling is most common for deep wells through rock formations, while cable tool (percussion) drilling works well in unconsolidated materials like sand and gravel. After drilling, the well is cased with steel or PVC pipe to prevent contamination from surface water, and a submersible pump is installed at the appropriate depth to bring water to the surface. A pressure tank system in your home maintains consistent water pressure. The complete system includes the well itself, casing, pump, pressure tank, and connection piping. New wells require permits from state or local water authorities, and most states mandate a water quality test before the well can be used. Costs vary enormously by region and depth — from $6,000 in the Southeast to over $30,000 in areas with deep bedrock or difficult drilling conditions.

Florida Regulations for Well Drilling

Florida regulates septic systems through the Florida Department of Environmental Protection (DEP) and county health departments. Two separate things are often confused here. The Clean Waterways Act moved regulatory authority from the Department of Health to DEP on 1 July 2021, and the rule chapter went with it — Chapter 64E-6 was transferred to Chapter 62-6, F.A.C. Field permitting is transferring on a slower, phased schedule: on 2 January 2025 DEP took over permitting and inspections in sixteen Panhandle counties, Escambia east to Jefferson, plus Marion, working from service hubs in Pensacola, Panama City and Tallahassee. Everywhere else the county health department still issues the permit, under DEP’s rules. Separately from all of that, DEP’s Basin Management Action Plans designate nutrient-impaired watersheds where new and replacement systems can be required to use Enhanced Nutrient Reduction technology — a watershed boundary, not a county one. A new installation needs a site evaluation, a construction permit and inspections at several stages. Florida mandates a minimum of 24 inches of unsaturated soil below the drain field bottom — a challenging requirement given the state's notoriously high water tables, which can be as shallow as 12 inches below grade in coastal areas. Systems must be set back 75 feet from wells and 50 feet from surface water. The state requires septic inspections for real estate transactions in many counties.

Licensing Requirements

Florida moved septic contractor regulation from the Department of Health to the Department of Environmental Protection on 1 July 2021 under the Clean Waterways Act, and the rules moved with it — Chapter 64E-6, F.A.C. was transferred to Chapter 62-6. A registered septic business holds two credentials on two different clocks: the business Certificate of Authorization runs two years and expires 31 March of odd years, while the registered septic tank contractor standing behind it renews every year on 30 September. The earlier date is the one that governs. Water well contractors are licensed separately under Rule 62-531, F.A.C., on a two-year cycle, and that licence is valid statewide regardless of which water management district issued it. Permitting is a separate question from licensing: county health departments still issue septic permits across most of Florida, but DEP took over field permitting in sixteen Panhandle counties and Marion on 2 January 2025.

Environmental Considerations

Florida's biggest septic challenge is its high water table — in many coastal and central areas, groundwater sits just 12 to 24 inches below the surface, severely limiting conventional drain field options. Sandy soils in most of the state provide excellent percolation but minimal treatment, raising concerns about nutrient loading into springs, lakes, and the Indian River Lagoon. The new BMAP regulations represent the state's most aggressive effort to address septic nutrient pollution, requiring nitrogen-reducing systems that can cost two to three times more than conventional installations. Hurricane and flood damage to septic systems is a recurring issue in coastal counties.

Signs You Need Well Drilling

  • Building a new home without access to municipal water supply
  • Existing well has gone dry or produces insufficient water
  • Water quality has deteriorated beyond what treatment can fix
  • Adding irrigation needs that exceed existing well capacity
  • Existing well is contaminated and cannot be rehabilitated

The Well Drilling Process

  1. 1 Site assessment and hydrogeological survey to identify the best drilling location
  2. 2 Obtain required drilling permits from state or local water authority
  3. 3 Mobilize drilling rig and begin boring through soil and rock layers
  4. 4 Install well casing and screen at the appropriate aquifer depth
  5. 5 Develop the well by pumping to clear drilling debris and maximize flow
  6. 6 Install submersible pump, pressure tank, and connection piping
  7. 7 Conduct water quality testing and obtain certificate of completion

Frequently Asked Questions — Well Drilling in Florida

How much does it cost to drill a well?
Well drilling costs $15-$85 per foot depending on geology, plus pump, casing, and completion. Total project costs by region: Southeast $6,000-$12,000 (shallow aquifers), Mid-Atlantic $12,000-$18,000, Midwest $8,000-$12,000, and Western states $20,000-$50,000+ (hard rock, deep aquifers). The biggest cost driver is depth — research nearby well logs before requesting quotes.
How deep does a residential well need to be?
Deep enough to reach a reliable aquifer with adequate yield (3-5 gallons per minute minimum for most homes). Average depths vary dramatically: Florida 40-80 feet, Southeast 100-200 feet, Mid-Atlantic 150-300 feet, and Western mountain areas 300-600 feet. Your county may have well log databases showing depths of nearby wells — this is the best predictor of what your well will require.
How long does it take to drill a well?
The drilling itself takes 1-3 days for most residential wells. However, the full timeline includes permitting (1-4 weeks), driller scheduling (1-4 weeks depending on season), drilling and completion (1-3 days), water quality testing (1-2 weeks for lab results), and plumbing connection (1-2 days). Total timeline from decision to running water is typically 4-10 weeks.
What happens if the driller does not hit water?
Policies vary by driller. Most charge their per-foot rate regardless — you pay for the hole whether it produces water or not. Some offer depth guarantees (drill up to a set depth before declaring dry). A few provide dry hole insurance (adds 10-15% to the quote). In the eastern US, dry holes are uncommon (under 5%). In western hard-rock areas, rates reach 10-15%. Ask about dry hole policy before signing any contract.

Find Well Drilling in Florida Cities

Browse 22 cities in Florida for well drilling providers.

Other Services in Florida