Skip to main content

Well Pump Repair in Cheyenne, WY

Laramie County County · 0 providers · Avg. $300 - $3,000

About Well Pump Repair in Cheyenne

Well pump repair services address the mechanical and electrical components that bring water from your well into your home. The submersible pump — located deep inside your well — is the hardest-working component of your water system, running thousands of cycles per year to maintain household water pressure. Common pump problems include motor failure (often caused by electrical surges or sediment wear), check valve failures (causing the pump to short-cycle), waterlogged pressure tanks (losing the air charge that maintains consistent pressure), and control switch malfunctions. When your well pump fails, the symptoms are unmistakable: no water at any faucet, sputtering or air in the water lines, rapidly cycling pressure (the pump turns on and off every few seconds), or a sudden drop in water pressure. Emergency pump failures are stressful because your entire household loses water. Many well service companies offer 24/7 emergency service for complete pump failures. Standard repairs include replacing the pressure switch ($150-$300), replacing the pressure tank ($500-$1,500), pulling and replacing the submersible pump ($1,000-$3,000), and electrical troubleshooting. Submersible pumps typically last 8-15 years depending on water quality, usage volume, and installation quality.

What Cheyenne Homeowners Should Know

Local Soil Conditions: Featherlegs loam and Altvan loam on the High Plains surface — Aridic Argiustolls and Typic Haplustalfs with moderate percolation; Nunn clay loam in lower positions with slower drainage; Larim gravelly sandy loam on upland ridges with excellent percolation; Bentonite-bearing Pierre Shale formations create localized expansive clay hazards

Water Table: 20 to 50 feet in most areas; deeper in the High Plains; shallower near Crow Creek and Dry Creek drainages

Climate Impact: Semi-arid steppe (BSk) at 6,062 feet elevation. One of the windiest cities in the U.S., with average wind speeds of 12-14 mph. Cold winters with frequent blizzards; mild summers. Annual precipitation 15 inches. High elevation accelerates UV degradation of exposed plastic components.

Signs You Need Well Pump Repair

  • No water at any faucet in the house
  • Pump runs continuously without building pressure
  • Pump cycles on and off rapidly (short-cycling)
  • Sputtering water or air in the lines
  • Sudden drop in water pressure throughout the house
  • Unusually high electric bills (pump running constantly)

The Well Pump Repair Process

  1. 1 Diagnose the failure — check electrical supply, pressure switch, and pressure tank
  2. 2 Test the well pump motor for electrical faults
  3. 3 If pressure tank is waterlogged, replace or recharge the air bladder
  4. 4 If pump has failed, pull the pump from the well using specialized equipment
  5. 5 Install new pump at the correct depth with new safety rope and wiring
  6. 6 Test system operation, verify proper pressure range and cycle times

No Well Pump Repair providers listed yet in Cheyenne

Are you a well pump repair professional in Cheyenne? List your business for free.

Frequently Asked Questions — Cheyenne

What parts of the Cheyenne area are on septic systems?
Cheyenne city limits are largely served by municipal sewer. Rural residential areas throughout Laramie County — including ranch lots along I-25, Fox Farm, Carpenter, and Burns communities — are on private septic systems. Many acreage developments within 10 miles of the city also use septic. Contact Laramie County Planning to verify sewer availability for any specific address.
What is Bentonite and why does it matter for septic systems in Cheyenne?
Bentonite is a highly expansive clay mineral derived from weathered volcanic ash, found in Wyoming's Pierre Shale formations. When wet, Bentonite swells dramatically — sometimes to 15 times its dry volume. This creates structural damage to rigid septic tanks and pipe connections, and essentially zero percolation for leach fields. If a soil evaluation finds Bentonite-bearing materials, an engineered alternative system (mound, drip irrigation) must be designed to avoid the restrictive zone.
How does Cheyenne's wind affect septic systems?
Cheyenne's persistent high winds (averaging 12-14 mph) benefit evapotranspiration-based systems by increasing surface moisture loss, but they also accelerate UV degradation of exposed plastic components like risers and distribution boxes. All above-grade components should be UV-resistant. Wind-driven soil erosion can also expose leach field piping if proper revegetation is not established after installation.
Are there septic restrictions near Cheyenne's Granite Reservoir?
Granite Reservoir is a primary drinking water source for Cheyenne. WDEQ and Laramie County require enhanced setbacks and advanced treatment for any septic systems within the reservoir's contributing watershed. New systems are rarely approved in this area, and existing systems near the reservoir face increasing pressure to upgrade or connect to an extended sewer line.
What does a WDEQ Chapter 25 site evaluation involve?
A Wyoming Chapter 25 site evaluation includes a detailed soil profile description to a minimum depth of 5 feet using a backhoe pit, a percolation test in the design leach field area, measurement of seasonal high water table, and documentation of any restrictive layers. The evaluation must be performed by a WDEQ Registered Site Evaluator or Professional Engineer. Results determine the system type, size, and setback requirements.

Other Services in Cheyenne

🌿Drain Field Repair🍳Grease Trap Pumping🔍Septic Inspection🏗️Septic System Installation🚽Septic Tank Pumping🔧Septic Repair💧Well Drilling🔬Well Water Testing💦Well Water Treatment

Nearby Cities

Also serving these areas

Casper, WY