Well Water Testing in Myrtle Beach, SC
Horry County County · 0 providers · Avg. $50 - $500
About Well Water Testing in Myrtle Beach
Well water testing analyzes your private well water for contaminants including bacteria, nitrates, heavy metals, pH levels, and other substances that can affect health and taste. The EPA does not regulate private wells — the responsibility falls entirely on the homeowner. An estimated 23% of private wells have at least one contaminant exceeding health-based standards according to the USGS. Annual testing is recommended at minimum, with additional testing after flooding, nearby land use changes, or if you notice changes in taste, color, or odor. Basic tests cover coliform bacteria and nitrates — the two most common and dangerous contaminants in well water. Comprehensive panels add testing for lead, arsenic, manganese, iron, hardness, pH, total dissolved solids, volatile organic compounds, and pesticides depending on your region and local geology. Results typically take 5-14 business days from a certified laboratory. If contaminants are found, treatment options range from simple point-of-use filters to whole-house treatment systems depending on what is detected and at what concentration.
What Myrtle Beach Homeowners Should Know
Local Soil Conditions: Wando and Lakeland soil series are the primary upland soils in the Myrtle Beach area — excessively drained, deep Entisols with fine to medium sand throughout the profile. These soils offer excellent percolation (less than 3 minutes per inch in many locations) but minimal treatment capacity for nutrients and pathogens. Closer to tidal creeks, the Waccamaw and Paxville soils — poorly drained, organic-matter-rich Ultisols and Histosols — have water tables within inches of the surface and cannot support conventional drain fields.
Water Table: Upland Wando soils have water tables at 5–10 feet on barrier island ridges and inland terraces. However, proximity to the coast means tidal fluctuations influence groundwater elevation within 0.5–1 mile of tidal waters, and storm surge events can temporarily elevate water tables across wide areas. Low-lying pocosins and Carolina bay wetlands throughout Horry County maintain near-surface water tables year-round.
Climate Impact: Myrtle Beach has a humid subtropical climate with hot, humid summers and mild winters. Annual rainfall averages 52 inches with a summer peak from June through August driven by afternoon thunderstorms and tropical weather. Hurricane season (June–November) is a major concern — Horry County has experienced significant septic system damage from multiple landfalling storms including Floyd (1999), Matthew (2016), and Florence (2018), which caused prolonged flooding across the county's flat coastal plain.
Signs You Need Well Water Testing
- Annual testing is overdue — all private wells should be tested at least yearly
- Water has a new or unusual taste, odor, or color
- Recent flooding or heavy rainfall near the well
- Nearby construction, agriculture, or land use changes
- Household members experiencing unexplained gastrointestinal illness
- Buying or selling a property with a private well
The Well Water Testing Process
- 1 Contact a certified water testing laboratory or local health department for test kits
- 2 Collect water samples following the lab's instructions for each test type
- 3 Submit samples to the lab within the required holding time (usually 24-48 hours)
- 4 Lab analyzes samples and compares results to EPA health-based standards
- 5 Receive a detailed report showing contaminant levels and whether they exceed guidelines
- 6 If issues are found, consult with a water treatment professional for remediation options
No Well Water Testing providers listed yet in Myrtle Beach
Are you a well water testing professional in Myrtle Beach? List your business for free.