Skip to main content
NH
πŸ”¬

Well Water Testing in New Hampshire

Avg. $50 - $500 · Annually (minimum)

2
Cities
$50 - $500
Avg. Cost

Well water testing analyzes your private well water for contaminants including bacteria, nitrates, heavy metals, pH levels, and other substances that can affect health and taste. The EPA does not regulate private wells β€” the responsibility falls entirely on the homeowner. An estimated 23% of private wells have at least one contaminant exceeding health-based standards according to the USGS. Annual testing is recommended at minimum, with additional testing after flooding, nearby land use changes, or if you notice changes in taste, color, or odor. Basic tests cover coliform bacteria and nitrates β€” the two most common and dangerous contaminants in well water. Comprehensive panels add testing for lead, arsenic, manganese, iron, hardness, pH, total dissolved solids, volatile organic compounds, and pesticides depending on your region and local geology. Results typically take 5-14 business days from a certified laboratory. If contaminants are found, treatment options range from simple point-of-use filters to whole-house treatment systems depending on what is detected and at what concentration.

New Hampshire Regulations for Well Water Testing

New Hampshire regulates onsite septic systems through the NH Department of Environmental Services (NHDES), Subsurface Systems Bureau. The governing rule is Env-Wq 1000, the Rules for the Design, Installation, and Maintenance of Disposal Systems. All new installations and major repairs require a permit from NHDES. A site-specific design must be prepared by a Licensed Site Evaluator or Professional Engineer and submitted to NHDES for review before a permit is issued. The state enforces setback requirements of 75 feet from surface waters, 75 feet from private wells, and 20 feet from property lines. New Hampshire requires a completed as-built plan to be filed with the town clerk and NHDES within 30 days of system completion. Shared systems serving two or more dwellings require an operation and maintenance plan approved by NHDES. The Shoreland Water Quality Protection Act adds additional siting restrictions within 250 feet of designated water bodies.

Licensing Requirements

New Hampshire licenses Site Evaluators through NHDES under Env-Wq 600 rules. Applicants must pass a written and field examination, demonstrate two years of supervised experience, and hold a degree in soil science, environmental science, or a related field. Septic installers must be licensed by the NH Office of Professional Licensure and Certification as a Site Evaluator or Septic System Evaluator. Pumping and septage hauling companies must register with NHDES and comply with solid waste transportation rules. Site Evaluators must complete 20 continuing education credits per two-year renewal cycle.

Environmental Considerations

New Hampshire's soils are predominantly glacially derived, with thin, coarse-textured soils over fractured bedrock β€” a combination that accelerates percolation but reduces natural filtration distance. The White Mountains region has extremely shallow soil horizons requiring engineered systems on most lots. The Lakes Region, with its hundreds of lakes and ponds, imposes strict setback requirements that constrain system placement for lakefront properties. Seasonal frost depth of 40 to 60 inches in the north requires deep tank burial or insulated components. Arsenic and radon in bedrock groundwater heighten the importance of maintaining proper separation distances between septic systems and private wells.

Signs You Need Well Water Testing

  • Annual testing is overdue β€” all private wells should be tested at least yearly
  • Water has a new or unusual taste, odor, or color
  • Recent flooding or heavy rainfall near the well
  • Nearby construction, agriculture, or land use changes
  • Household members experiencing unexplained gastrointestinal illness
  • Buying or selling a property with a private well

The Well Water Testing Process

  1. 1 Contact a certified water testing laboratory or local health department for test kits
  2. 2 Collect water samples following the lab's instructions for each test type
  3. 3 Submit samples to the lab within the required holding time (usually 24-48 hours)
  4. 4 Lab analyzes samples and compares results to EPA health-based standards
  5. 5 Receive a detailed report showing contaminant levels and whether they exceed guidelines
  6. 6 If issues are found, consult with a water treatment professional for remediation options

Frequently Asked Questions β€” Well Water Testing in New Hampshire

How often should I test my well water?
At minimum, test annually for coliform bacteria and nitrates. Test more frequently if you have infants or elderly household members, notice changes in taste or appearance, have had past contamination, or experience flooding near your well. Real estate transactions typically require a comprehensive panel within 90 days of closing.
What does a basic well water test cover?
A basic test typically covers total coliform bacteria, E. coli, nitrates, and pH. These are the most common and health-critical contaminants in private wells. A comprehensive panel adds heavy metals (lead, arsenic, manganese), hardness, iron, sulfate, total dissolved solids, and sometimes pesticides or volatile organic compounds depending on your region.
How much does well water testing cost?
Basic bacteria and nitrate testing runs $50-$100 through your county health department or a certified lab. Comprehensive panels testing for 20-50+ parameters cost $150-$500. Specialty testing for radon, pesticides, or volatile organic compounds may add $50-$200 per parameter. Many county health departments offer free or subsidized basic testing.

Find Well Water Testing in New Hampshire Cities

Browse 2 cities in New Hampshire for well water testing providers.

Other Services in New Hampshire