Well Drilling in Nebraska
Avg. $6,000 - $25,000 · One-time (well lifespan 30-50 years)
Water well drilling is the process of boring a hole into the earth to access underground aquifers that provide fresh water for drinking, irrigation, and household use. Approximately 43 million Americans rely on private wells as their primary water source. Residential wells typically range from 100 to 500 feet deep depending on the local geology and water table depth, though some areas require wells exceeding 1,000 feet. The drilling method depends on the geological conditions — rotary drilling is most common for deep wells through rock formations, while cable tool (percussion) drilling works well in unconsolidated materials like sand and gravel. After drilling, the well is cased with steel or PVC pipe to prevent contamination from surface water, and a submersible pump is installed at the appropriate depth to bring water to the surface. A pressure tank system in your home maintains consistent water pressure. The complete system includes the well itself, casing, pump, pressure tank, and connection piping. New wells require permits from state or local water authorities, and most states mandate a water quality test before the well can be used. Costs vary enormously by region and depth — from $6,000 in the Southeast to over $30,000 in areas with deep bedrock or difficult drilling conditions.
Nebraska Regulations for Well Drilling
Nebraska regulates on-site wastewater treatment systems through the Nebraska Department of Environment and Energy (NDEE), formerly NDEQ, under Nebraska Statute 71-1517 through 71-1535 and Title 124 (Regulations Governing Individual and Municipal Wastewater Systems). County public health departments administer permits under NDEE delegation. A site and soil evaluation must precede permit issuance, including soil texture and structure analysis, percolation testing, and depth to seasonal high groundwater. Required setbacks include 100 feet from water supply wells, 5 feet from property lines, and 25 feet from drainage ditches. Nebraska requires minimum lot areas based on soil percolation rates and proximity to public water supplies. The state permits conventional septic tank and soil absorption systems, pressure distribution, mound systems, and aerobic treatment units (ATUs). ATUs require an approved maintenance contract with a licensed provider. NDEE operates the Nebraska Environmental Data and Information System (NEDIS) for permit tracking. Nebraska's Location Along the Ogallala Aquifer creates a strong regulatory interest in preventing groundwater contamination from septic systems, particularly in Sand Hills regions.
Licensing Requirements
Nebraska requires on-site wastewater system designers to hold a Professional Engineer (PE) license or a Registered Sanitarian credential recognized by NDEE. Installers must obtain a county-issued contractor license in most counties and pass a competency examination. Pumpers must comply with NDEE septage disposal rules under Title 119 and register with their county health department. ATU maintenance providers must be approved by NDEE and hold manufacturer certification. License renewals require continuing education documentation every two years.
Environmental Considerations
Nebraska's geology and hydrology are dominated by the Ogallala Aquifer, which underlies approximately 78 percent of the state and provides drinking water to more than 80 percent of Nebraskans. The Nebraska Sand Hills, covering about 20,000 square miles in north-central Nebraska, feature Thurman and Valentine sandy soil series with extremely high permeability and a water table often within 5 to 15 feet of the surface—creating high contamination risk from conventional septic systems. Eastern Nebraska's loessial soils (Sharpsburg, Marshall, and Crete series) have moderate permeability and good biological treatment capacity but shallow water tables in river valleys. The Platte River corridor's alluvial soils have high groundwater that seasonally rises to within 2 to 4 feet of the surface. Nebraska's climate ranges from 14 inches annual precipitation in the Panhandle to 34 inches in the southeast.
Signs You Need Well Drilling
- Building a new home without access to municipal water supply
- Existing well has gone dry or produces insufficient water
- Water quality has deteriorated beyond what treatment can fix
- Adding irrigation needs that exceed existing well capacity
- Existing well is contaminated and cannot be rehabilitated
The Well Drilling Process
- 1 Site assessment and hydrogeological survey to identify the best drilling location
- 2 Obtain required drilling permits from state or local water authority
- 3 Mobilize drilling rig and begin boring through soil and rock layers
- 4 Install well casing and screen at the appropriate aquifer depth
- 5 Develop the well by pumping to clear drilling debris and maximize flow
- 6 Install submersible pump, pressure tank, and connection piping
- 7 Conduct water quality testing and obtain certificate of completion
Frequently Asked Questions — Well Drilling in Nebraska
How much does it cost to drill a well?
How deep does a residential well need to be?
How long does it take to drill a well?
What happens if the driller does not hit water?
Find Well Drilling in Nebraska Cities
Browse 2 cities in Nebraska for well drilling providers.
Other Services in Nebraska
Drain Field Repair
Restore or replace failed leach fields and drain lines to prevent sewage surfaci…
🍳Grease Trap Pumping
Commercial grease trap cleaning and pumping to prevent sewer blockages and maint…
🔍Septic Inspection
Comprehensive evaluation of your septic system's condition, required for real es…
🏗️Septic System Installation
Complete new septic system design and installation, from perc testing to final i…
🚽Septic Tank Pumping
Regular pumping removes accumulated solids from your septic tank, preventing bac…
🔧Septic Repair
Diagnose and fix septic system problems including leaks, clogs, baffle failures,…
⚙️Well Pump Repair
Diagnose and repair well pump failures, pressure tank issues, and water flow pro…