Skip to main content

Well Drilling in Des Moines, IA

Polk County County · 0 providers · Avg. $6,000 - $25,000

About Well Drilling in Des Moines

Water well drilling is the process of boring a hole into the earth to access underground aquifers that provide fresh water for drinking, irrigation, and household use. Approximately 43 million Americans rely on private wells as their primary water source. Residential wells typically range from 100 to 500 feet deep depending on the local geology and water table depth, though some areas require wells exceeding 1,000 feet. The drilling method depends on the geological conditions — rotary drilling is most common for deep wells through rock formations, while cable tool (percussion) drilling works well in unconsolidated materials like sand and gravel. After drilling, the well is cased with steel or PVC pipe to prevent contamination from surface water, and a submersible pump is installed at the appropriate depth to bring water to the surface. A pressure tank system in your home maintains consistent water pressure. The complete system includes the well itself, casing, pump, pressure tank, and connection piping. New wells require permits from state or local water authorities, and most states mandate a water quality test before the well can be used. Costs vary enormously by region and depth — from $6,000 in the Southeast to over $30,000 in areas with deep bedrock or difficult drilling conditions.

What Des Moines Homeowners Should Know

Local Soil Conditions: Polk County soils are dominated by deep Mollisols developed on the Des Moines Lobe — the youngest glaciated region of Iowa, covered by ice as recently as 12,000-14,000 years ago. Webster silty clay loam and Nicollet clay loam are the most common soils — both poorly to somewhat poorly drained with seasonal water tables at 0-24 inches, 30-45% clay content, and slow to moderately slow permeability. Clarion loam on upland swells is better drained with moderate permeability. Harps silty clay loam in closed depressions is very poorly drained with water at the surface much of the year. Des Moines River floodplain soils (Nodaway silt loam, Haynie fine sandy loam) are deep and moderately well-drained but subject to annual flooding.

Water Table: Webster and Nicollet soils have seasonal high water tables at 0-18 inches from December through May. Clarion soils have water tables at 18-36 inches. Harps soils have water tables at or above the surface. Polk County's extensive subsurface tile drainage infrastructure has lowered average water tables in agricultural areas by 1-2 feet but the tiles themselves intercept and concentrate lateral flow. The Raccoon River and Des Moines River maintain water tables within 3-5 feet along their corridors.

Climate Impact: Des Moines has a humid continental climate with hot, humid summers (average July high 85°F) and cold winters. Annual precipitation averages 35 inches, distributed through the year with spring peaks. Severe thunderstorms and occasional tornadoes in spring and summer can deliver intense rainfall. Winter precipitation is primarily snow and mixed precipitation (20-25 inches). Spring flooding of the Des Moines and Raccoon Rivers is a recurring event, with the 2008 floods being among the most destructive in Iowa history.

Signs You Need Well Drilling

  • Building a new home without access to municipal water supply
  • Existing well has gone dry or produces insufficient water
  • Water quality has deteriorated beyond what treatment can fix
  • Adding irrigation needs that exceed existing well capacity
  • Existing well is contaminated and cannot be rehabilitated

The Well Drilling Process

  1. 1 Site assessment and hydrogeological survey to identify the best drilling location
  2. 2 Obtain required drilling permits from state or local water authority
  3. 3 Mobilize drilling rig and begin boring through soil and rock layers
  4. 4 Install well casing and screen at the appropriate aquifer depth
  5. 5 Develop the well by pumping to clear drilling debris and maximize flow
  6. 6 Install submersible pump, pressure tank, and connection piping
  7. 7 Conduct water quality testing and obtain certificate of completion

No Well Drilling providers listed yet in Des Moines

Are you a well drilling professional in Des Moines? List your business for free.

Frequently Asked Questions — Des Moines

Does my Des Moines area septic system contribute to the Raccoon River nitrate problem?
Individual residential septic systems contribute a very small amount of nitrate relative to agricultural drainage, which is the dominant source. However, the cumulative effect of many on-site systems in the Raccoon River watershed is measurable and is part of Iowa DNR's watershed management planning. Properly functioning systems with adequate soil treatment substantially reduce nitrate loading compared to failing systems. Maintaining your system — pumping on schedule, fixing leaks, reducing household water use — is the most effective thing you can do to minimize your system's contribution to watershed nutrient loading.
What is a mound septic system and why do I need one in Polk County?
A mound system builds the drainfield above the native soil on an elevated bed of imported sand and gravel fill, achieving the required vertical separation from the seasonal water table or restrictive soil layer. Iowa DNR requires a minimum 2-foot separation between the drainfield bottom and the seasonal high water table for most system types. On Webster silty clay loam — which dominates most of Polk County — the water table is within 12-18 inches of the surface, leaving no room for a below-grade drainfield. Mound systems solve this by elevating the drainfield 2-4 feet above the native soil. They cost $10,000-$17,000 in the Des Moines area, reflecting material costs for imported fill sand and gravel.
How often should I pump my septic tank in the Des Moines, Iowa area?
Iowa DNR recommends pumping every 3-5 years. In Polk County, a 3-year cycle is advisable for the majority of systems, which are mound or LPP types serving the poorly drained soils of the Des Moines Lobe. Annual inspection of pump and float components is recommended for all pump-dependent systems (mound, LPP). If your household includes more people than the system was designed for, or if you have a garbage disposal (which significantly increases solids loading), pump every 2-3 years.
How much does septic pumping cost in the Des Moines, Iowa area?
Septic pumping in Polk County typically runs $225 to $375 for a standard residential tank. Iowa's moderate cost of living makes pumping costs lower than the national average. The Des Moines metro area has numerous licensed septage haulers, maintaining competitive pricing. Many Polk County pumpers offer a combined pump-out and visual inspection for $275-$400 that allows early detection of mechanical or structural issues.
My Polk County property floods occasionally — what does that mean for my septic system?
Flood events can overwhelm and damage on-site systems. If your system was submerged or received large volumes of floodwater, Iowa DNR guidance recommends pumping the tank, inspecting all components, and avoiding heavy system use until the ground has drained. Floodwater introduces sediment and pathogens into the tank and drainfield, and the saturated soil after a flood reduces drainfield capacity temporarily. For recurring flood risk, speak with your county health department about whether your system can be modified to reduce flood vulnerability, or whether relocation of components to higher ground is feasible.

Other Services in Des Moines

🌿Drain Field Repair🍳Grease Trap Pumping🔍Septic Inspection🏗️Septic System Installation🚽Septic Tank Pumping🔧Septic Repair⚙️Well Pump Repair🔬Well Water Testing💦Well Water Treatment

Nearby Cities

Also serving these areas

Cedar Rapids, IA