Skip to main content

Well Water Testing in Denver, CO

Denver County County · 0 providers · Avg. $50 - $500

About Well Water Testing in Denver

Well water testing analyzes your private well water for contaminants including bacteria, nitrates, heavy metals, pH levels, and other substances that can affect health and taste. The EPA does not regulate private wells — the responsibility falls entirely on the homeowner. An estimated 23% of private wells have at least one contaminant exceeding health-based standards according to the USGS. Annual testing is recommended at minimum, with additional testing after flooding, nearby land use changes, or if you notice changes in taste, color, or odor. Basic tests cover coliform bacteria and nitrates — the two most common and dangerous contaminants in well water. Comprehensive panels add testing for lead, arsenic, manganese, iron, hardness, pH, total dissolved solids, volatile organic compounds, and pesticides depending on your region and local geology. Results typically take 5-14 business days from a certified laboratory. If contaminants are found, treatment options range from simple point-of-use filters to whole-house treatment systems depending on what is detected and at what concentration.

What Denver Homeowners Should Know

Local Soil Conditions: Denver urban soils are predominantly Arapahoe fine sandy loam and Nunn clay loam, heavily disturbed by development. Native soils on the eastern plains surrounding Denver are Ulysses silt loam and Sampson fine sandy loam, moderately well-drained with moderate percolation rates. Urban fill soils are common in older neighborhoods and require site-specific assessment.

Water Table: Seasonal high groundwater typically 10 to 20 feet below surface in most Denver metro areas, rising to 5 to 8 feet in South Platte River floodplain areas.

Climate Impact: Denver has a semi-arid climate with 300 days of sunshine annually. Average annual precipitation is 14.3 inches, mostly as spring snowfall and summer afternoon thunderstorms. Hot dry summers reduce soil biological activity, while rapid freeze-thaw cycles in spring can stress system components.

Signs You Need Well Water Testing

  • Annual testing is overdue — all private wells should be tested at least yearly
  • Water has a new or unusual taste, odor, or color
  • Recent flooding or heavy rainfall near the well
  • Nearby construction, agriculture, or land use changes
  • Household members experiencing unexplained gastrointestinal illness
  • Buying or selling a property with a private well

The Well Water Testing Process

  1. 1 Contact a certified water testing laboratory or local health department for test kits
  2. 2 Collect water samples following the lab's instructions for each test type
  3. 3 Submit samples to the lab within the required holding time (usually 24-48 hours)
  4. 4 Lab analyzes samples and compares results to EPA health-based standards
  5. 5 Receive a detailed report showing contaminant levels and whether they exceed guidelines
  6. 6 If issues are found, consult with a water treatment professional for remediation options

No Well Water Testing providers listed yet in Denver

Are you a well water testing professional in Denver? List your business for free.

Frequently Asked Questions — Denver

How often should I pump my septic tank in the Denver area?
Most Denver-area septic tanks should be pumped every 3 to 5 years for a typical 3-4 bedroom home. Denver's semi-arid climate and cold winters do not significantly extend pumping intervals—regular maintenance remains essential to prevent drainfield clogging from sludge carryover.
Does Denver's altitude affect my septic system?
Altitude itself does not directly affect septic system function, but the associated semi-arid climate reduces soil moisture and biological activity. Drainfields at Denver's 5,280-foot elevation receive less annual precipitation, which means evapotranspiration contributes more to effluent dispersal than in wetter climates—a benefit, but not a substitute for properly sized absorption fields.
What permits do I need to replace a septic system near Denver?
Replacement systems in unincorporated Denver metro areas require a new Onsite Wastewater Treatment System (OWTS) permit from Tri-County Health Department. You will need a site evaluation report from a licensed PE or sanitarian, a system design, and a construction permit before work begins. Final inspection is required before backfilling.
Can I install a conventional drainfield on the Denver plains clay soils?
Conventional gravity drainfields may not be approved on Nunn or Wiley clay soils common in the Denver metro because their percolation rates are too slow to meet CDPHE Regulation 43 minimum standards. A licensed evaluator will determine whether a mound system, pressure distribution, or drip irrigation system is required based on your specific site conditions.
What are typical septic system installation costs in the Denver metro?
Conventional septic system installation in the Denver metro typically ranges from $8,500 to $14,000 for a standard 3-bedroom home on suitable soils. Mound or drip irrigation systems required by clay soil conditions range from $15,000 to $22,000 or more. Front Range contractor demand and material costs are higher than rural Colorado averages.

Other Services in Denver

🌿Drain Field Repair🍳Grease Trap Pumping🔍Septic Inspection🏗️Septic System Installation🚽Septic Tank Pumping🔧Septic Repair💧Well Drilling⚙️Well Pump Repair💦Well Water Treatment