Skip to main content

Well Pump Repair in Colorado Springs, CO

El Paso County County · 0 providers · Avg. $300 - $3,000

About Well Pump Repair in Colorado Springs

Well pump repair services address the mechanical and electrical components that bring water from your well into your home. The submersible pump — located deep inside your well — is the hardest-working component of your water system, running thousands of cycles per year to maintain household water pressure. Common pump problems include motor failure (often caused by electrical surges or sediment wear), check valve failures (causing the pump to short-cycle), waterlogged pressure tanks (losing the air charge that maintains consistent pressure), and control switch malfunctions. When your well pump fails, the symptoms are unmistakable: no water at any faucet, sputtering or air in the water lines, rapidly cycling pressure (the pump turns on and off every few seconds), or a sudden drop in water pressure. Emergency pump failures are stressful because your entire household loses water. Many well service companies offer 24/7 emergency service for complete pump failures. Standard repairs include replacing the pressure switch ($150-$300), replacing the pressure tank ($500-$1,500), pulling and replacing the submersible pump ($1,000-$3,000), and electrical troubleshooting. Submersible pumps typically last 8-15 years depending on water quality, usage volume, and installation quality.

What Colorado Springs Homeowners Should Know

Local Soil Conditions: El Paso County soils around Colorado Springs include the Hyattville-Olney complex—a fine sandy loam to loam texture with moderate permeability—and Pring sandy loam on slopes. Foothill areas west of the city feature shallow Wetmore-Stoneham rocky soils over Pikes Peak granite. Urban disturbed fill soils are widespread throughout the developed urban core.

Water Table: Groundwater depth ranges from 15 to 40 feet in most upland areas. Fountain Creek and Monument Creek floodplains show seasonal groundwater at 4 to 8 feet during spring snowmelt.

Climate Impact: Colorado Springs has a semi-arid climate at 6,035 feet elevation. Annual precipitation averages 16.5 inches, with notable monsoon moisture from July through September. Winters are cold with ground frost persisting November through March. Afternoon thunderstorms in summer can temporarily saturate drainfields.

Signs You Need Well Pump Repair

  • No water at any faucet in the house
  • Pump runs continuously without building pressure
  • Pump cycles on and off rapidly (short-cycling)
  • Sputtering water or air in the lines
  • Sudden drop in water pressure throughout the house
  • Unusually high electric bills (pump running constantly)

The Well Pump Repair Process

  1. 1 Diagnose the failure — check electrical supply, pressure switch, and pressure tank
  2. 2 Test the well pump motor for electrical faults
  3. 3 If pressure tank is waterlogged, replace or recharge the air bladder
  4. 4 If pump has failed, pull the pump from the well using specialized equipment
  5. 5 Install new pump at the correct depth with new safety rope and wiring
  6. 6 Test system operation, verify proper pressure range and cycle times

No Well Pump Repair providers listed yet in Colorado Springs

Are you a well pump repair professional in Colorado Springs? List your business for free.

Frequently Asked Questions — Colorado Springs

Do I need a septic system in Colorado Springs if I live near the city?
Properties within the Colorado Springs city limits are generally connected to the municipal sewer system managed by Colorado Springs Utilities. Rural properties in unincorporated El Paso County—including Black Forest, Fountain, Falcon, and Peyton—typically rely on onsite septic systems regulated by El Paso County Public Health.
How did the Black Forest Fire affect septic systems in the area?
The 2013 Black Forest Fire destroyed over 500 homes, many served by septic systems. Post-fire replacement systems were required to meet current El Paso County design standards, which in some cases differed from the original installation requirements. Homeowners rebuilding after the fire were advised to conduct fresh site evaluations because fire can alter soil structure and permeability, potentially changing system design requirements.
What soil types are common in El Paso County for septic installation?
El Paso County soils range from the moderate-drainage Hyattville-Olney sandy loam complex on the plains to shallow, rocky Wetmore soils over Pikes Peak granite in foothill areas. The sandy loam soils generally support conventional gravity systems, while foothill sites with less than 18 inches of soil over bedrock typically require engineered mound or drip irrigation systems.
How often should Colorado Springs area septic tanks be pumped?
El Paso County Public Health recommends pumping every 3 to 5 years for a standard residential septic tank. Households with garbage disposals or larger-than-average occupancy should pump more frequently, closer to every 2 to 3 years, to prevent solids from migrating into the drainfield.
What is required for a septic system permit in El Paso County?
An OWTS permit from El Paso County Public Health requires a completed site evaluation report by a licensed engineer or registered sanitarian, a system design that complies with CDPHE Regulation 43, and a completed permit application with fee payment. Work must not begin until the permit is issued, and a final inspection is required before the system is covered.

Other Services in Colorado Springs

🌿Drain Field Repair🍳Grease Trap Pumping🔍Septic Inspection🏗️Septic System Installation🚽Septic Tank Pumping🔧Septic Repair💧Well Drilling🔬Well Water Testing💦Well Water Treatment