Well Water Testing in Arkansas
Avg. $50 - $500 · Annually (minimum)
Well water testing analyzes your private well water for contaminants including bacteria, nitrates, heavy metals, pH levels, and other substances that can affect health and taste. The EPA does not regulate private wells — the responsibility falls entirely on the homeowner. An estimated 23% of private wells have at least one contaminant exceeding health-based standards according to the USGS. Annual testing is recommended at minimum, with additional testing after flooding, nearby land use changes, or if you notice changes in taste, color, or odor. Basic tests cover coliform bacteria and nitrates — the two most common and dangerous contaminants in well water. Comprehensive panels add testing for lead, arsenic, manganese, iron, hardness, pH, total dissolved solids, volatile organic compounds, and pesticides depending on your region and local geology. Results typically take 5-14 business days from a certified laboratory. If contaminants are found, treatment options range from simple point-of-use filters to whole-house treatment systems depending on what is detected and at what concentration.
Arkansas Regulations for Well Water Testing
Arkansas regulates onsite wastewater systems through the Arkansas Department of Health (ADH), Environmental Health Division, under Arkansas Code Annotated §14-236 and the Arkansas Rules and Regulations Pertaining to Onsite Wastewater Systems (Regulation 22). County health units under ADH authority issue permits, conduct soil evaluations, and perform construction inspections. Arkansas requires a soil morphology evaluation and site assessment before permit approval; percolation testing is used as a secondary confirmation in some situations. The state mandates 75-foot setbacks from water supply wells, 50-foot setbacks from streams, 15-foot setbacks from property lines, and 25-foot setbacks from drainage ditches. Arkansas has a tiered system recognition approach for conventional gravity, pressure distribution, mound, and aerobic treatment unit systems. The state's Ozark and Ouachita mountain regions have strict provisions for steep slope sites and shallow rocky soils. ADH also regulates septic tank manufacturers and requires all tanks to meet IAPMO standards.
Licensing Requirements
Arkansas requires septic system installers to be licensed by the Arkansas Department of Health. Installers must complete approved training, pass the ADH licensing examination, carry liability insurance, and renew annually with continuing education. Septic pumpers must be registered with ADH, maintain vehicle permits, and document all septage disposal at state-approved sites. Soil evaluators conducting site evaluations for permits may be licensed professional soil scientists or certified ADH sanitarians. Engineers designing advanced systems must hold Arkansas PE licensure. The Arkansas On-Site Wastewater Association (AOWA) supports industry training and lobbying efforts.
Environmental Considerations
Arkansas's roughly 350,000 onsite systems serve communities across a diverse landscape ranging from the Ozark Plateau and Ouachita Mountains in the north and west to the Delta lowlands of the Mississippi Alluvial Plain in the east. The Ozark and Ouachita mountain regions have thin, rocky soils over limestone and sandstone bedrock with limited drainfield siting options, particularly on steep slopes. The Buffalo National River watershed in Newton County has been the site of significant controversy over a large concentrated animal feeding operation's impact on groundwater quality, highlighting the vulnerability of Ozark karst aquifers to surface contamination including septic leachate. The Arkansas Delta's heavy clay soils have very low permeability, making conventional drainfields difficult to design and often requiring mound systems.
Signs You Need Well Water Testing
- Annual testing is overdue — all private wells should be tested at least yearly
- Water has a new or unusual taste, odor, or color
- Recent flooding or heavy rainfall near the well
- Nearby construction, agriculture, or land use changes
- Household members experiencing unexplained gastrointestinal illness
- Buying or selling a property with a private well
The Well Water Testing Process
- 1 Contact a certified water testing laboratory or local health department for test kits
- 2 Collect water samples following the lab's instructions for each test type
- 3 Submit samples to the lab within the required holding time (usually 24-48 hours)
- 4 Lab analyzes samples and compares results to EPA health-based standards
- 5 Receive a detailed report showing contaminant levels and whether they exceed guidelines
- 6 If issues are found, consult with a water treatment professional for remediation options
Frequently Asked Questions — Well Water Testing in Arkansas
How often should I test my well water?
What does a basic well water test cover?
How much does well water testing cost?
Find Well Water Testing in Arkansas Cities
Browse 3 cities in Arkansas for well water testing providers.
Other Services in Arkansas
Drain Field Repair
Restore or replace failed leach fields and drain lines to prevent sewage surfaci…
🍳Grease Trap Pumping
Commercial grease trap cleaning and pumping to prevent sewer blockages and maint…
🔍Septic Inspection
Comprehensive evaluation of your septic system's condition, required for real es…
🏗️Septic System Installation
Complete new septic system design and installation, from perc testing to final i…
🚽Septic Tank Pumping
Regular pumping removes accumulated solids from your septic tank, preventing bac…
🔧Septic Repair
Diagnose and fix septic system problems including leaks, clogs, baffle failures,…
💧Well Drilling
Professional water well drilling for residential and commercial properties witho…
⚙️Well Pump Repair
Diagnose and repair well pump failures, pressure tank issues, and water flow pro…
💦Well Water Treatment
Water treatment systems for private wells — filtration, softening, UV disinfecti…